Mobile Elevated Work Platform
Training for novice and experienced operators to various levels of certification, as well as bespoke courses. Contact your local centre to discuss your requirements
Mobile Elevated Work Platform (Scissor) Training Course Outline
- Identify the basic construction, purpose and function of components and the purpose and use of all controls and gauges.
- Identify and comply with manufacturers instructions in accordance with the operators handbook, other information sources i.e, duties charts and applicable legislation.
- Explain all relevant documentation.
- Explain all displayed information on the machine.
- Carry out all pre-use and running checks.
- Carry out emergency lowering procedures.
- Operate controls from ground level, and from within the working platform.
- Manoeuvre the MEWP involving tight turns and limited access, using both forward and reverse motions.
- Position the platform up to a maximum working height.
- Keep within safe working parameters.
- Place the machine in an out-of-service condition.
- Explain the loading and unloading procedures on and off a transporter.
Mobile Elevated Work Platform (Boom) Training Course Outline
- Vehicle mounted
- Self–propelled
- Identify the basic construction, purpose and function of components and the purpose and use of all controls and gauges.
- Identify and comply with manufacturers instructions in accordance with the operators handbook, other information sources i.e. duties chart, and applicable legislation.
- Explain all relevant documentation.
- Explain all displayed information on the machine.
- Carry out all pre-use and running checks.
- Carry out emergency lowering procedures.
- Operate controls from ground level, and from within the work platform.
- Manoeuvre the MEWP involving tight turns and limited access, using both forward and reverse motions.
- Travel the MEWP with the platform in a raised position ( self-propelled units only)
- Position the platform up to maximum working height.
- Position the platform out to maximum reach.
- Keep within safe working parameters.
- Place the machine in and out-of-service condition.
- Explain loading and unloading procedures on and off a transporter.
Mobile Elevated Work Platform ( Mast Climber ) Training Course Outline
- Identify the basic construction, purpose and function of components and the purpose and use of all controls and gauges.
- Identify and comply with manufacturers instructions in accordance with the operators handbook. Other information sources i.e. duties charts, and applicable legislation.
- Ensure the mast climber is sited and erected.
- Carry out all pre-use and running checks.
- Prepare the platform to accept various loads.
- Raise and lower platform up to maximum working height in a loaded and unloaded state.
- Keep within safe working parameters.
- Put the platform in an out-of-service condition.
Training for novice and experienced operators to various levels of certification, as well as bespoke courses. Contact your local centre to discuss your requirements